Fonctionnement technique
The liner has to cover the bottom, run up the sloped banks and overlap the edge. The tool calculates the sloped length of the bank from the depth and slope, adds the overlap at each edge and a folds allowance, and reports the length and width, area, weight and cost.
Mode d’emploi étape par étape
Enter the pond length, width and depth.
Enter the bank slope and the overlap.
Optionally enter thickness and price.
Read the liner size and area.
Fonctionnalités & performances
- Sloped or vertical sides
- Overlap and folds allowance
- Liner weight
- Pond volume
Méthodologie, formules & standards
Side = top − 2 × slope × depth + 2 × depth × √(1 + slope²) + 2 × overlap.
Exemples concrets & cas limites
12 × 8 m pond, 1.5 m deep, 1.5:1 banks
0.5 m overlap, 5% allowance
About 14.3 × 10.2 m
Limites & notes de précision
- • Liners come in standard widths; welding may be needed.
- • Use an underlay to protect against stones and roots.
Traitement local dans le navigateur & confidentialité
Les convertisseurs classiques envoient vos documents, extraits ou médias sur des serveurs distants. Calculateur de Bâche de Bassin (Dimensions et Surface EPDM) s’exécute directement dans votre onglet :
Vos textes et fichiers sont traités localement sans aucun envoi vers un serveur de calcul.
Microdeck n’enregistre ni ne stocke les fichiers ou données collés dans les outils.
Les résultats restent dans la mémoire de votre onglet et sont libérés dès que vous le fermez.
Questions fréquentes (FAQ)
What thickness is used?
Often 0.5–1.0 mm HDPE for fish ponds.
Why add an allowance?
The liner follows folds and corners.
Is data uploaded?
No.
Outils associés à découvrir
Calculateur de Volume d'Étang et Densité d'Empoissonnement
Volume d'eau (m³), alevins à introduire et biomasse attendue à la récolte
Calculateur d'Aération d'Étang et Puissance en Chevaux (CV / HP)
Puissance d'aérateur (ch/kW) et nombre d'appareils selon la biomasse piscicole
Calculateur de Toxicité de l'Ammoniac (NH₃ Libre selon pH et Température)
Ammoniac toxique non ionisé (NH₃) d'après l'azote ammoniacal total (TAN), le pH et la température