작동 원리 및 구조
Small ceramic and film capacitors print a code instead of a value. The first two digits are the number and the third digit is the power of ten, giving picofarads. An optional letter gives the tolerance, and a prefix such as 2A gives the rated voltage. The tool reads that code, also accepts notation like 4n7, and shows the value in pF, nF and µF.
단계별 사용 방법
Type the code exactly as printed, for example 104 or 473K.
Read the capacitance in the unit you need.
Check the tolerance and voltage lines when the code includes them.
주요 기능 및 장점
- 3-digit EIA codes, 1–2 digit pF codes and 4n7-style notation
- Tolerance letters B to Z
- Common voltage codes such as 1H = 50 V and 2A = 100 V
- pF, nF and µF side by side
계산 방식, 공식 및 기술 표준
Value in pF = first two digits × 10^(third digit). Digit 8 multiplies by 0.01 and 9 by 0.1; digit 7 is not used.
입출력 예시 및 엣지 케이스
104
Code 104
100,000 pF = 100 nF = 0.1 µF
473K
Code 473K
47 nF, ±10%
제한 사항 및 정확도 안내
- • Voltage codes vary slightly between makers; check the datasheet.
- • Electrolytic and tantalum capacitors usually print the value directly.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 커패시터 코드 디코더 (콘덴서 용량 계산기) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What does 104 mean on a capacitor?
10 followed by four zeros in picofarads: 100,000 pF, which is 100 nF or 0.1 µF.
What does the letter K mean?
It is the tolerance, ±10%. J is ±5% and M is ±20%.
Is the code sent anywhere?
No. Decoding happens in your browser.