작동 원리 및 구조
Enter the wheelbase, the empty weight on each axle, the cargo weight and the distance of its centre from the front axle. The tool takes moments about the axles to find the new axle loads, compares them with the limits and shows the position range that is safe.
단계별 사용 방법
Enter the wheelbase and empty axle weights.
Enter the cargo weight and position.
Enter the axle and gross limits.
Read the axle loads and warnings.
주요 기능 및 장점
- Front and rear loads
- Limit margins
- Safe position range
- Gross weight check
계산 방식, 공식 및 기술 표준
Rear add = cargo × distance ÷ wheelbase; front add = cargo − rear add.
입출력 예시 및 엣지 케이스
2,200 kg at 3.0 m on a 4.2 m wheelbase
Truck with 3,000 and 4,500 kg axle limits
Front 2,429 kg, rear 2,971 kg
제한 사항 및 정확도 안내
- • Two-axle model only.
- • Weigh the vehicle when possible.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 화물차 축중(축하중) 배분 및 과적 방지 계산기 (Axle Weight) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What if my cargo is behind the rear axle?
Enter a distance larger than the wheelbase.
Is data uploaded?
No.