仕組みと内部処理
Enter the wheelbase, the empty weight on each axle, the cargo weight and the distance of its centre from the front axle. The tool takes moments about the axles to find the new axle loads, compares them with the limits and shows the position range that is safe.
使い方ステップ
Enter the wheelbase and empty axle weights.
Enter the cargo weight and position.
Enter the axle and gross limits.
Read the axle loads and warnings.
主な機能と特長
- Front and rear loads
- Limit margins
- Safe position range
- Gross weight check
計算ロジック・仕様・技術基準
Rear add = cargo × distance ÷ wheelbase; front add = cargo − rear add.
入出力の例・エッジケース
2,200 kg at 3.0 m on a 4.2 m wheelbase
Truck with 3,000 and 4,500 kg axle limits
Front 2,429 kg, rear 2,971 kg
仕様上の制限・精度に関するご注意
- • Two-axle model only.
- • Weigh the vehicle when possible.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。トラック軸重分布&輪荷重計算機 (Axle Weight Distribution) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What if my cargo is behind the rear axle?
Enter a distance larger than the wheelbase.
Is data uploaded?
No.