Cara Kerja di Balik Layar
Choose the algorithm (Modbus is the default), enter the frame bytes in hex such as 01 03 00 00 00 0A, and read the CRC. Modbus RTU sends the low byte first, and the tool shows the frame with the CRC appended.
Panduan Langkah demi Langkah
Choose the algorithm.
Enter hex bytes or ASCII text.
Copy the CRC or the full frame.
Fitur Utama & Performa
- CRC-16/MODBUS, CCITT-FALSE, XMODEM, KERMIT, ARC
- Hex or text input
- Low-byte-first order
- Frame with CRC
Metodologi, Rumus & Standar Teknis
A bitwise CRC with the polynomial, start value and bit order of the chosen algorithm. For Modbus: polynomial 0x8005 reflected, start 0xFFFF.
Contoh Kasus & Uji Coba
01 03 00 00 00 0A
CRC 0xCDC5
Bytes C5 CD
Catatan Batasan & Akurasi
- • Check against your device before use in a real installation.
- • Input is limited to what the browser can handle; very long data is not the intended use.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Modbus RTU CRC-16 Online berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
Which byte comes first in Modbus RTU?
The low byte of the CRC is sent first, then the high byte.
Is anything uploaded?
No. Everything runs in your browser and your data stays on your device.
Jelajahi Alat Mikro Terkait
Verifikator Checksum SHA & Signature Webhook HMAC
Hitung hash SHA-1/256/384/512 file/teks secara lokal, cocokkan manifes SHA256SUMS, dan uji signature webhook HMAC-SHA256
Visualisator Bitmask & Bit Register Hex/Biner
Lihat setiap bit nilai register 8, 16, atau 32-bit dan terapkan operasi AND, OR, XOR, serta pergeseran bit
Referensi Pinout ESP32 & Arduino (Pinout Reference)
Cek fungsi pin GPIO, ADC, PWM, I2C, SPI, UART & pin yang harus dihindari pada ESP32, Uno, Nano