Cara Kerja di Balik Layar
For flat trim each piece is cut at half the supplement of the corner angle. For a polygon it is 180° divided by the number of sides. For crown moulding lying on its back, the miter and bevel come from the spring angle and the wall angle.
Panduan Langkah demi Langkah
Choose trim, polygon or crown.
Enter the corner angle, number of sides or spring angle.
Read the saw settings.
Fitur Utama & Performa
- Flat trim and frames
- Polygons with any number of sides
- Compound crown angles
Metodologi, Rumus & Standar Teknis
Flat: (180° − corner)/2. Crown: miter = atan(sin S · tan(90° − W/2)), bevel = asin(cos S · cos(W/2)).
Contoh Kasus & Uji Coba
38° crown on 90°
Compound
Miter 31.6°, bevel 33.9°
Catatan Batasan & Akurasi
- • Walls are rarely exactly square; measure the corner and test on scrap.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Sudut Potong Miter Saw & Bevel (Lis Profil & Sudut Ruang) berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
What is the spring angle?
The angle between the back of the crown and the wall; 38° and 45° are most common.
Inside and outside corners?
The angles are the same; the pieces swap sides.
Is data uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Anak Tangga & Balok Stringer Tangga
Jumlah anak tangga, tinggi tanjakan (riser), lebar injakan (run), dan panjang balok tangga
Kalkulator Board Feet
Board feet dan biaya untuk daftar papan dalam inci, milimeter, atau sentimeter
Estimator Cat Dinding
Berapa banyak cat untuk satu ruangan: liter atau galon, lapisan, pintu, jendela, limbah