Cómo funciona por dentro
For flat trim each piece is cut at half the supplement of the corner angle. For a polygon it is 180° divided by the number of sides. For crown moulding lying on its back, the miter and bevel come from the spring angle and the wall angle.
Instrucciones paso a paso
Choose trim, polygon or crown.
Enter the corner angle, number of sides or spring angle.
Read the saw settings.
Funciones principales y ventajas
- Flat trim and frames
- Polygons with any number of sides
- Compound crown angles
Metodología, fórmulas y estándares técnicos
Flat: (180° − corner)/2. Crown: miter = atan(sin S · tan(90° − W/2)), bevel = asin(cos S · cos(W/2)).
Ejemplos prácticos y casos límite
38° crown on 90°
Compound
Miter 31.6°, bevel 33.9°
Límites y notas de precisión
- • Walls are rarely exactly square; measure the corner and test on scrap.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Ángulo de Inglete y Bisel (Molduras y Esquinas) se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
What is the spring angle?
The angle between the back of the crown and the wall; 38° and 45° are most common.
Inside and outside corners?
The angles are the same; the pieces swap sides.
Is data uploaded?
No.
Explora herramientas relacionadas
Calculadora de Escaleras y Limones (Peldaños y Huella)
Número de escalones, contrahuella, huella y longitud de zanca según normativa
Calculadora de pies tablares (board feet)
Board feet y coste para una lista de tablas en pulgadas, mm o cm
Estimador de pintura para paredes
Cuánta pintura para una habitación: litros o galones, manos, puertas, ventanas y desperdicio