Microdeck.tools 100 % dans le navigateur

Calculateur BTU de climatisation pour une pièce

New

Estimez la puissance de refroidissement selon la surface, la hauteur, le climat, le soleil, les occupants et les appareils.

100 % dans le navigateur Aucun envoi serveur Résultats instantanés

Cet outil vous a-t-il fait gagner du temps ? Aidez Microdeck à rester gratuit et maintenu. Facultatif · Dès $3.

Fonctionnement technique

The tool uses a rule-of-thumb base load per square metre that depends on climate (about 215 BTU/h per m² for temperate rooms and about 600 BTU/h per m² for hot, humid tropical climates), scaled by ceiling height against a 2.4 m base, then adds sun exposure, about 600 BTU/h per person beyond the first two, 4,000 BTU/h for a kitchen and the heat from equipment in watts × 3.412.

Mode d’emploi étape par étape

1

Enter the floor area and ceiling height.

2

Choose a climate and how much direct sun the room gets.

3

Enter the number of regular occupants and any heat-producing equipment.

4

Read the load in BTU/h, kW and the next standard AC size.

Fonctionnalités & performances

  • Two climate presets
  • Sun, occupants, kitchen and equipment adjustments
  • BTU/h, kW and nearest standard size
  • Shows the load before rounding up

Méthodologie, formules & standards

This is a sizing rule of thumb, not a Manual J load calculation. 1 kW of cooling is 3,412 BTU/h.

Exemples concrets & cas limites

Tropical bedroom

Entrée
20 m², 2.7 m ceiling, tropical, normal sun, 2 people
Sortie
13,500 BTU/h, choose a 15,000 BTU/h unit

Limites & notes de précision

  • • An oversized unit short-cycles and dries the air poorly; an undersized one runs constantly. Use the result as a starting point.
  • • Windows, insulation, roof type and the floor above all matter; for large or critical spaces ask an HVAC engineer for a full load calculation.

Traitement local dans le navigateur & confidentialité

Les convertisseurs classiques envoient vos documents, extraits ou médias sur des serveurs distants. Calculateur BTU de climatisation pour une pièce s’exécute directement dans votre onglet :

Traité dans cet onglet

Vos textes et fichiers sont traités localement sans aucun envoi vers un serveur de calcul.

Aucune journalisation des données

Microdeck n’enregistre ni ne stocke les fichiers ou données collés dans les outils.

Mémoire éphémère de l’onglet

Les résultats restent dans la mémoire de votre onglet et sont libérés dès que vous le fermez.

Questions fréquentes (FAQ)

How many BTU per square metre?

Roughly 200 to 250 for mild climates and 500 to 650 for hot, humid regions with sun-exposed rooms.

What does 1 HP mean for an AC?

About 9,000 BTU/h in Vietnam and many Asian markets, though makers vary. Compare the BTU/h or kW rating instead.

Is an inverter AC the same size?

Yes. Inverter models save power but are sized the same way.

Outils associés à découvrir

Soutenir Microdeck

Entièrement facultatif · Dès $3 · Sans compte

Choisir un montant (USD) :Sélectionné :$5

Le montant minimum est de $3 USD.

100 % facultatif · Dès $3 · Paiement sécurisé via Gumroad.