Microdeck.tools 100 % en el navegador

Calculadora de BTU para aire acondicionado

New

Estime la potencia de refrigeración según superficie, altura, clima, sol, ocupantes y equipos, y vea el tamaño estándar más cercano.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

The tool uses a rule-of-thumb base load per square metre that depends on climate (about 215 BTU/h per m² for temperate rooms and about 600 BTU/h per m² for hot, humid tropical climates), scaled by ceiling height against a 2.4 m base, then adds sun exposure, about 600 BTU/h per person beyond the first two, 4,000 BTU/h for a kitchen and the heat from equipment in watts × 3.412.

Instrucciones paso a paso

1

Enter the floor area and ceiling height.

2

Choose a climate and how much direct sun the room gets.

3

Enter the number of regular occupants and any heat-producing equipment.

4

Read the load in BTU/h, kW and the next standard AC size.

Funciones principales y ventajas

  • Two climate presets
  • Sun, occupants, kitchen and equipment adjustments
  • BTU/h, kW and nearest standard size
  • Shows the load before rounding up

Metodología, fórmulas y estándares técnicos

This is a sizing rule of thumb, not a Manual J load calculation. 1 kW of cooling is 3,412 BTU/h.

Ejemplos prácticos y casos límite

Tropical bedroom

Entrada
20 m², 2.7 m ceiling, tropical, normal sun, 2 people
Salida
13,500 BTU/h, choose a 15,000 BTU/h unit

Límites y notas de precisión

  • • An oversized unit short-cycles and dries the air poorly; an undersized one runs constantly. Use the result as a starting point.
  • • Windows, insulation, roof type and the floor above all matter; for large or critical spaces ask an HVAC engineer for a full load calculation.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de BTU para aire acondicionado se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

How many BTU per square metre?

Roughly 200 to 250 for mild climates and 500 to 650 for hot, humid regions with sun-exposed rooms.

What does 1 HP mean for an AC?

About 9,000 BTU/h in Vietnam and many Asian markets, though makers vary. Compare the BTU/h or kW rating instead.

Is an inverter AC the same size?

Yes. Inverter models save power but are sized the same way.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.