底層運作原理
Choose a metric or inch thread and read the tap drill, the clearance hole and the pitch. For metric threads you can enter your own drill to see how much of the thread it leaves. The full chart is shown below.
詳細操作步驟
Choose the thread system and size.
Optionally enter a drill size.
Read the tap drill and clearance hole.
核心功能與效能優勢
- Metric M2–M24
- Inch UNC and UNF
- Engagement check
- Full chart
運算方法、公式與技術標準
Drill = major diameter − 1.299 × pitch × engagement.
實作範例與邊界案例
M6 × 1
Metric coarse
5 mm tap drill, 6.6 mm clearance
使用限制與精準度說明
- • Check a machinist’s handbook for critical work.
- • Material changes the best drill.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。攻牙下孔鑽頭直徑與螺紋規格對照計算機 (Drill & Tap Size Calculator) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What engagement should I use?
About 60–80% for most work.
Is data uploaded?
No.