작동 원리 및 구조
The first two (or three) bands are digits, the next band is the multiplier (10ⁿ, with gold = 0.1 and silver = 0.01), then tolerance, and on 6-band parts the temperature coefficient. Value mode works backwards and rounds to the nearest E24 preferred value.
단계별 사용 방법
Choose 4, 5 or 6 bands.
Pick each band color from the lists, or type a value like 4k7 to get colors.
Read resistance, tolerance and range.
주요 기능 및 장점
- Colour swatches in the selectors
- Value formats such as 4k7, 2R2, 1M
- E24 nearest value
- Tolerance range in ohms
입출력 예시 및 엣지 케이스
4-band
Brown, black, red, gold
1 kΩ ±5%
5-band
Yellow, violet, black, brown, brown
4.7 kΩ ±1%
제한 사항 및 정확도 안내
- • Read bands starting from the end nearest the edge; faded or similar colors (red, orange, brown) are easy to confuse, so confirm with a meter.
- • Some old or military parts use different codes.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 저항 컬러 코드 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Which end do I start from?
The tolerance band (gold or silver) is on the right. Bands are usually closer together on the left side.
What does E24 mean?
A series of 24 preferred values per decade used for 5% resistors, such as 1.0, 1.1, 1.2, 1.3, 1.5.
Is data stored?
No.