작동 원리 및 구조
Enter the total dry weight of the batch and the percentage of bran, gypsum and lime. The rest is sawdust. The water to add is dry weight × moisture ÷ (100 − moisture), so the finished mix reaches the target moisture. The tool also shows how many bags of a given weight the batch fills.
단계별 사용 방법
Enter the total dry ingredient weight.
Set the bran, gypsum and lime percentages.
Set the target moisture and the weight of one bag.
Read the weight of each ingredient and the water to add.
주요 기능 및 장점
- Percent-based recipe
- Water for a target moisture
- Bags per batch
- Warns when supplements exceed 100%
계산 방식, 공식 및 기술 표준
Water = dry weight × moisture ÷ (100 − moisture). Sawdust = dry weight − bran − gypsum − lime.
입출력 예시 및 엣지 케이스
10 kg dry, 20% bran, 1.5% gypsum
62% moisture
7.85 kg sawdust, 16.3 kg water, about 10 bags of 2.5 kg
제한 사항 및 정확도 안내
- • Assumes the dry ingredients are bone dry; real sawdust holds some moisture.
- • Species differ: check the recipe recommended for yours.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 버섯 톱밥 배지 배합 비율 및 수분 조절 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What moisture should a block have?
Hardwood sawdust blocks usually run about 60–65%.
Is the water in litres or kilograms?
One litre of water weighs one kilogram.
Is data uploaded?
No.