仕組みと内部処理
Heat loss equals the U-value of the covering times its surface area times the temperature difference, plus an allowance for air leakage. The tool computes the area of a gable house from its length, width, wall and ridge height, applies the U-value for the covering, and sizes the heater with a safety margin.
使い方ステップ
Enter the house dimensions.
Choose the covering.
Enter the inside target and coldest outside temperatures.
Read the load and the heater size.
主な機能と特長
- Five covering types
- kW and BTU/h
- Safety margin
- Energy for a cold night
計算ロジック・仕様・技術基準
Heat loss (W) = U × covering area × ΔT × (1 + leakage). 1 W = 3.412 BTU/h.
入出力の例・エッジケース
10 × 4 m double-poly house, 12 °C inside, −5 °C outside
15% leakage
About 8.4 kW (28,700 BTU/h)
仕様上の制限・精度に関するご注意
- • Wind and ground loss can add to the load.
- • Check ventilation and safety rules for any fuel heater.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。ビニールハウス・温室暖房熱量計算機 (暖房負荷・kW/BTU) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
How can I cut the load?
A thermal curtain or bubble wrap can cut losses by 30–40%.
Does it handle other roof shapes?
It models a gable house; use the ridge equal to the wall for a flat roof.
Is data uploaded?
No.