Cómo funciona por dentro
Choose the tank shape and enter the inside dimensions. The tool gives the full capacity in litres, cubic metres and US and UK gallons. If you also enter the liquid depth it gives the volume of liquid, the percent full and the space left, including the circular-segment formula for horizontal tanks.
Instrucciones paso a paso
Choose the shape and the length unit.
Enter the dimensions.
Optionally enter the liquid depth.
Read capacity and content.
Funciones principales y ventajas
- Five shapes
- mm, cm, m, inches and feet
- Partial fill for every shape
- Litres, m³, US and UK gallons
Metodología, fórmulas y estándares técnicos
Cylinder π r² h; cone π r² h / 3; tapered π h (r1² + r1 r2 + r2²) / 3; horizontal partial fill uses the circular segment area times length.
Ejemplos prácticos y casos límite
Vertical 1.5 m × 2 m
Full
About 3534 L
Límites y notas de precisión
- • Inside dimensions only; domed ends and fittings are not included.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Volumen y Nivel de Tanques se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
How do I measure the depth?
From the lowest inside point of the tank to the liquid surface.
Can I use inches?
Yes, pick inches or feet.
Is anything uploaded?
No.
Explora herramientas relacionadas
Calculadora de Tiempo de Llenado de Líquidos y Rendimiento
Calcula tiempo de llenado por botella y botellas por hora (BPH)
Calculadora de Calibración de Bomba Dosificadora
Calcula caudal (ml/min, L/h) a partir de volumen y tiempo; calcula tiempo de dosificación
Calculadora de Tiempo de Llenado de Calderín de Compresor
Calcula el tiempo de llenado del tanque de aire comprimido o el caudal real FAD/CFM