Cómo funciona por dentro
Enter the register value (0x.. hex, 0b.. binary or decimal), pick the width, and enter a mask. The tool lists the bit positions and shows the result of each bitwise operation.
Instrucciones paso a paso
Enter the value and the width.
Enter a mask and shift.
Read the bit table and results.
Funciones principales y ventajas
- 8, 16 and 32-bit widths
- Bit index table
- AND, OR, XOR, NOT, shifts
- Field extraction with a mask
Metodología, fórmulas y estándares técnicos
Unsigned bitwise operations on a register of fixed width.
Ejemplos prácticos y casos límite
0xA5 and mask 0x0F
0x05
Low nibble = 5
Límites y notas de precisión
- • Unsigned values only.
- • Bit meanings come from your datasheet; the tool only shows bits.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Visualizador de Bits y Máscaras de Registros (Bitmask) se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
How do I read a field from a register?
AND the value with the field mask, then shift right by the lowest set bit of the mask. The tool does this in the last result.
Is anything uploaded?
No. Everything runs in your browser and your data stays on your device.
Explora herramientas relacionadas
Calculadora de CRC-16 Modbus RTU Online
Calcula el CRC-16 para tramas Modbus RTU o cadenas de bytes hexadecimales
Convertidor Binario/Hex BigInt e Inspector IEEE-754 Float
Convierte enteros Binario/Octal/Decimal/Hex sin límite, Complemento a 2 y Float32/64
Guía de Pines de ESP32 y Arduino (Pinout Reference)
Consulta funciones GPIO, ADC, PWM, I2C, SPI, UART y pines a evitar en ESP32, Uno, Nano y NodeMCU