Microdeck.tools 100 % im Browser

Arbeitszeiterfassung & Stundenrechner

New

Geben Sie Beginn, Ende und Pause je Schicht ein und erhalten Sie Gesamt-, Regel- und Überstunden sowie optional den Bruttolohn.

100 % im Browser Kein Server-Upload Sofort-Ergebnisse

Hat Ihnen dieses Tool Zeit gespart? Helfen Sie mit, Microdeck kostenlos und aktuell zu halten. Freiwillig · Ab $3.

So funktioniert es unter der Haube

For each shift the worked time is end − start − break. If the end time is earlier than the start, the shift is treated as running past midnight, so 22:00 to 06:00 is 8 hours before the break. Hours above the per-shift overtime threshold are overtime. Pay is regular hours × rate plus overtime hours × rate × multiplier.

Schritt-für-Schritt-Anleitung

1

Add a row for each shift with a label, start time, end time (hh:mm) and unpaid break in minutes.

2

Set when overtime starts per shift.

3

Optionally enter the hourly rate and overtime multiplier.

4

Read total, regular and overtime hours and the shift table.

Wichtige Funktionen & Vorteile

  • Overnight shifts
  • Unpaid breaks in minutes
  • Overtime split per shift
  • Hours as hh:mm and decimal
  • Optional gross pay

Praxisbeispiele & Grenzfälle

One week

Eingabe
Five shifts of about 8 to 10 hours with 45 to 60 min breaks, OT after 8 h
Ausgabe
42:15 total, 2:30 overtime

Night shift

Eingabe
22:00 to 06:00, 30 min break
Ausgabe
7:30 worked

Hinweise zu Grenzen & Genauigkeit

  • • Overtime rules differ: some systems count weekly hours, night or weekend premiums and rounding. This tool uses a per-shift threshold only.
  • • Check the result against your local labour law and contract before using it for payroll.

Lokale Verarbeitung im Browser & Datenschutz

Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. Arbeitszeiterfassung & Stundenrechner läuft direkt in Ihrem Browser-Tab:

Verarbeitung in diesem Tab

Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.

Keine Speicherung von Eingaben

Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).

Flüchtiger Tab-Speicher

Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.

Häufig gestellte Fragen (FAQ)

How are overnight shifts handled?

When the end time is earlier than the start, the tool adds 24 hours, so a shift of 22:00 to 06:00 is eight hours long.

What is the difference between hh:mm and decimal hours?

7:30 is 7.5 hours. Payroll usually needs decimal hours, so both are shown.

Is overtime calculated weekly?

No, per shift. If your rules use weekly thresholds, use the total hours and apply your own threshold.

Ähnliche Mikro-Tools entdecken

Microdeck unterstützen

Vollkommen freiwillig · Ab $3 · Kein Konto nötig

Betrag wählen (USD):Ausgewählt:$5

Der Mindestbetrag beträgt $3 USD.

Vollkommen freiwillig · Ab $3 · Checkout öffnet über Gumroad.