So funktioniert es unter der Haube
Paste one line per day with the maximum and minimum temperature. Each temperature is limited to the base and upper cutoff, averaged, and the base subtracted. The daily values add up to the accumulated GDD, and a target shows roughly how many days remain at the average rate.
Schritt-für-Schritt-Anleitung
Choose the temperature unit and enter the base and cutoff.
Paste the daily max and min temperatures.
Optionally enter a target GDD.
Read the daily and cumulative GDD.
Wichtige Funktionen & Vorteile
- Modified method with caps
- Daily table with cumulative total
- Target and days left
- °C or °F
Methodik, Formeln & technische Standards
GDD = (Tmax + Tmin) ÷ 2 − base, after limiting both temperatures to the base and upper cutoff.
Praxisbeispiele & Grenzfälle
Six days with base 10 °C, cutoff 30 °C
Highs 19–31, lows 8–18
54 GDD
Hinweise zu Grenzen & Genauigkeit
- • Each crop and stage has its own base temperature and target.
- • Daily weather is variable, so the days-left figure is a rough guide.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. Wachstumsgradtage-Rechner (GDD / Growing Degree Days) läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
What base temperature should I use?
About 10 °C for maize and tomato, 5 °C for many vegetables, 0 °C for wheat.
Is the calculation Fahrenheit-ready?
Yes; switch the unit and use base and cutoff in °F.
Is data uploaded?
No.
Ähnliche Mikro-Tools entdecken
Erntedatum-Prognose für Kulturen
Ernte aus Pflanzdatum über Tage bis zur Reife oder Wärmesumme (GDD) vorhersagen
Pflanzenlampen-DLI- & PPFD-Rechner (Tageslichtintegral)
Tageslichtintegral (DLI) aus PPFD und Beleuchtungsstunden berechnen oder Ziel-PPFD ermitteln
Gewächshaus-Heizleistungsrechner (BTU & kW)
Benötigte Heizleistung aus Eindeckungsmaterial, Abmessungen und Temperaturdifferenz berechnen